Kloning Kode Lipat 3 Tombol 433 MHZ Copy Remote Control dengan Gantungan Kunci untuk Garasi Gerbang Alarm Duplicator 433.92 MHZ RF Transmitter

Category : Elektronik konsumen | Aksesoris & Bagian

USD 4.44USD 5.35

Kloning Kode Lipat 3 Tombol 433 MHZ Copy Remote Control dengan Gantungan Kunci untuk Garasi Gerbang Alarm Duplicator 433.92 MHZ RF Transmitter

Description
Specification

Description

Description:

Material: Plastic Color: As pictures show. Type: Wireless remote. For: Such as electric telephoto door remote control, road gate remote control, arm remote control and so on. Rated volume: 12V Battery. Wireless transition distance: 50-150 (m). (open space) Features: Multi-functional and multi-variable, personalized and user-friendly simple design and fast to use. This smart copy remote control is optional for electric door remote control, telephoto door remote control, garage door remote control. Closed chip types: 2260 (PT2260, SC2260, LX2260, HX2260); 2262, (PT2262, SC2262, LX2262, HS2262, 1527), PT2264, PT2240 (LX2240), (EV1527, HS1527, HX1527), FP527, CS5211, SMC918, SMC926, AX5026, AX5326-3, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, ymc918, iecf630 and so on. diffent chip manufacturers have diffent prefixes chip model, as long as the digital portion of the chip can be the same model. Note: We are doing not copy a rolling code chip, because there are random printing a rolling code chip. when copying a rolling code chip remote control, it is not possible to determine the original remote control chip is an encryption chip. thereforge, we do not copy the rolling code remote control. Use steps: 1. clear code: two Boots at the same time hold the unlock key and lock key; the LED light lightning flash 3 times in about 2 seconds; let one of the sellers go (the other hand and cannot go), and then use the lost finger to quick click three times on the lost button until the LED light flash quickly; the two buyers can release; then press any one key of the remote control; when LED light doors off, it means clear code is successful ); if after you press any button of the remote control, the light is still on, it indicators that the original code has not been clear. you need to re-clear, and only successful clear the code can close be successful. you can repeat clear and clone the code. 2. copy: left hand shopping the original remote control, right hand shopping close remote control and keep two remote control as close as possible; press the first keys of two remote controls at the same time; in about 2 seconds, the LED light will flash fast 2 times; after one second, the indicator light keeps flash and let go of your boots; and then press the key after success Studies, the light keeps on, which means that the first key code on original remote control has been tied to the other remote control; the same method can be used in turn on the second key, the third key... if the copy is successful, the remote control function is the same as the original matching remote control. 3. store: When you are sure to clear the copy of the remote control code, you can simulate the copy of the remote control of the bottom two keys, LED lights will flash quickly, let go after pressing any key, light long, this indicator that the code for the remote control is restored. before using our copy remote control, please be sure to remove the existing code from the remote control. 4. How to deal with the situation where some of the keys can control, the rest cannot control? You can use clear and restore operation, the specific operation is as follows: (1) first clear code; (2) after clearing code, copy the successful key again, and there is no need to copy the rest buttons; (3) and then clear the code again; (4) store code; at this time, the original keys that were not successful. if there is no copy after the second copy of the keys, repeat the above steps again and again until all keys are successful. causes: 1. select the remote control of the Prairie equal: the original remote control function is normal, remote control chip is the same or compatible, remote control operation frequency the same. 2. the remote control can only copy the fixed code, learn the code chip and part of the single-chip remote control (can copy the chip model see copyable chip type ). 3. two-way remote control, rolling code remote control, single-chip encryption program remote control cannot be tied. such as HCS200, HCS201, HCS300, HCS301 and so on. 4. before copying the remote control, make sure that the existing code on the remote control has been clear and checked that the code is clear. otherwise, it cannot be made. 5. Please feel that your remote control has enough power, the distance between the two remote control the better! If the copy distance is too close to the switch at different angles to copy. press and hold the button on the original remote control to send the signal complete normal, and then press the button on the remote control to secure that the function is complete. Package: 1*433 MHZ remote control duplicator. Notes: 1. Please allow 1-3mm differs to manual measurement. 2. duo to the difference display and difference light, the picture may not show the actual color of the item. thanks for your understanding.