Description

Small Electric Push Rod Telescopic Rod DC 3v5v Micro Mini Wireless Control Remote Control Lift Rod Linear Motor

Product parameters:

Size: The diameter of the main body is 8mm, the diameter of the telescopic part is 4mm, and the diameter of the upper and lower mounting holes is 3mm. For the specific dimensions, please refer to the product picture below for details.

Stroke: 30mm stroke, 45mm stroke 2 specifications, you can choose according to your needs.

Voltage: within the range of DC 3V ~ 5V, such as: 3 AA batteries in series (4.5V), power bank (5V output voltage), mobile phone charger (5V output voltage).

Thrust: varies with voltage, between 0.5kg ~ 0.75kg (1 catties ~ 1.5 catties) at 5v voltage.

Speed: 8～10mm/s, with the change of voltage and load, the higher the voltage, the faster the speed.

Material: The outer wall is made of 304 stainless steel precision tube, and the upper and lower installation joints are nylon.

Internal power: DC geared motor, the push rod can be extended and retracted by controlling the forward and reverse rotation of the motor.

Precautions:

There is no travel switch at the upper and lower limit positions of the push rod. Please pay attention to the upper and lower limit positions before powering off, or use an external travel switch, otherwise the motor will be blocked and burned, and will not be responsible for it! ! !

Product 1: The stroke is about 30mm

Product 2: The stroke is about 45mm

Product 3: Stroke about 30mm with remote control

Product 4: Stroke about 45mm with remote control

Wiring method: The remote control receiving module includes 4 wires, which are red, black, yellow, and yellow. The red wire of the module is connected to the positive pole of the power supply, the black wire is connected to the negative pole of the power supply, and the power supply voltage is 3v-5v. The 2 yellow wires are connected to the 2 wires of the push rod. There is no distinction between positive and negative electrodes, and they can be wired at will.

How to use: The remote control has 2 buttons. When not pressed, the receiver module of the remote control is not powered on. When one of the buttons is pressed, the push rod extends (or retracts), and when the other button is pressed, it retracts (or stretch out). When the push rod is moving, the button can be released at any time, and the push rod will stop running and self-lock.