About Working mode:

Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.Tiem delay mode :Push the remote control button , the relay connects , from when release the remote button , after 5s or 10s or 15s , the relay disconnect automatically.

433MHz Receiver :

Clearing the code :

Method 1：Push the learning button on the receivers for 8 times , the codes will be cleaned;Method 2：Keeping press the Learning Button on the receiver until the LED indicator ON and then flash,until it flash for 8 times. it mean the code have been cleared successfully;After clearing the code, all the remote control cannot work any more.

Learning the code :(Momentary)

Push the learning key on the receiver 1 time , it comes into momentary setting mode .Wait for a moment , the LED will be off , it comes into learning state .Push the remote button , LED indicator on the receiver board will flash then come off .After 3 seconds, the LED indicator will be on again , learning successfully .

Learning the code : ( Toggle )

Push the learning key on the receiver 2 times , it comes into toggle setting modeWait for a moment , the LED will be off , it comes into learning state .Push the remote button,LED indicator on the receiver board will flash then come off.After 3 seconds , the LED indicator will be on again , learning successfully .

Learning the code :( Latching )

Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.For example : button A = ON , button B = OFFPush the learning key on the receiver 3 times , it comes into latching mode .Wait for a moment , the LED indicator on the receiver board will flash then come off.Push the remote button A .LED flash for 5 times .Push the remote button B .Led flash for 5 times .After 3 seconds , the LED indicator will be on again , learning successfully.A = ON , B = OFF .

Specifications Of The Remote Control:

Operating frequency: 433MHzPower by 23A 12V (Battery not included ),Material: PVC.Button: 4 buttonsEncoding type: Learning.Transfers distance: 20-50m Special Note:These remotes are not clone remotes.These remotes only work with my receiver.Please do not buy the remote control privately.