Specifications:
Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.
Transmitter
Channel: 12 CH
Remote Control Distance:0-200 M ( Ideal Distance without any block and signal interfere , it would rise and fall about 10%-90% with the block and signal interference.)
Encode: PT2262
Frequency:315 or 433 MHz
Size: 125mm x 49mm x 20mm
Power Supply: 1 X 12V/23A Battery (NOT included)
Receiver
Decode: Learning Code,Fixed Code
Control Type: Toggle, Momentary, Latched
Power Supply (Operating Voltage): DC 12V / 24V
Relay: 20A 14VDC 20A 125VAC
Work Voltage Range of Relay: DC 0-28V
State current: ≤10 mA
Load current:≤ 7A
Sensitivity:-107 dBm
Operating Temperature:-40‘C - 80’C
Function (Original Setting is Momentary, Change it by yourself.)
1).1-12 Toggle/Self-lock :Press 1 button==>on,press the same button again==>off (Press key 1 to learn)
press key 1, 1 relay works, press key 1 again, 1 relay stops working.press key 2,2 relay works,press key 2 again,key 2 stops working. 3-12 key works like this.
2) 1-12 Momentary/Jog:Press and hold==> on, release==>off (Press key 2 to learn)
press key 1 and hold,1 relay works,loosen the finger. 1 relay stops working. 2-12 key works like this.
3)1-12 Latched/inter-lock:press 1 button ==>on,press other button==>off (Press key 3 to learn)
press key 1,1 relay works,press key 2, 1 relay stops working,2 relay works.3-12 key works like this.
4)1-6 Toggle 7-12 Momentary (Press key 4 to learn)
5)1 Toggle 2-12 Momentary (Press key 5 to learn)
Clear Code and Learn Code
1) Learn
press the learning button 1 time,the learning LED turns on,then press the transmitter key (choose the 1 2 3 4 5) to learn.the indicator flashs 1 time. It means learning sucessfully.
2) Clear
press the learning button for 8 seconds until the indicator turns off, that means the code has been cleared.
Package Included
1 x Receiver (with cover)
1/2 x Transmitter ( no batteries inside)