Description

Introduction:

The DM556 digital driver is powered by DC 24-50V and is suitable for two-phase hybrid stepping motors with a 42-57-86 two-phase hybrid stepping motor and a current less than 5.6A. The current loop of the AC servo drive is used for subdivision control, which has strong anti-interference, stable operation of the equipment, no loss of step, low torque fluctuation of the motor and high positioning accuracy.

Features:

1 power supply voltage up to 48VDC

2 output current peaks up to 5.6A

3 optical isolation, input can be common, common yang, differential signal, impulse response frequency 200KHz

4 low speed zero vibration, and noise and small

5 Strong anti-interference ability, high precision positioning in the harsh environment of the power grid

Application areas:

Automatic packaging machine, dispensing machine, engraving machine and other automation equipment

Electrical characteristics:

Input power 24~50V DC power supply, capacity: not less than 200VA. Typical value: DC36V

Output current 1.0A ~ 5.6A, 8 files adjustable, resolution 0.5A.

Drive mode Bipolar constant current PWM drive output.

Insulation resistance >500MΩ at normal temperature and pressure.

Insulation strength 500V/min at normal temperature and pressure.

The weight is about 200 grams

Remarks: The DIP switch has red and blue functions, and the functions are the same, which does not affect normal use (the color of the DIP switch is random)