Description
Specifications:
Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.
1.Transmitter
Channel: 2 CH
Remote Control Distance:0-3000 M( Ideal Distance without any block and signal interfere , it would rise and fall about 10%-90% with the block and signal interference.)
Encode: PT2262
Frequency:315 or 433 MHz
Size: 150mm x 42mm x 26mm
Power Supply: 1 X 6F22 9V Battery(NOT included)
2.Receiver
1)Toggle/Self-Lock: Press->On; Press again->Off
Press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
2)Latched/Inter-Lock: Press->On; Press other button->Off
Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
3)Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
(Original Setting is Toggle , Change it by yourself.)
Decode: Learning code,soldering code
Power Supply (Operating Voltage): AC 110V-220V
Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC
Current:<=7ma
Sensitivity:-107 dBm
Operating Temperature:-40‘C ~ 80’C
3.Package Included
0/1 x Receiver (with cover)
1/2/3 x Transmitter (no batteries inside)
4.Learn code and Remove Code
Learn: input the 110V-220V to the receiver,press the learning button then the LED indicator ON.Then press key 1 and press key 2 on the transmitter.At last press the learning button again to finish learning.
Remove:keep pressing the learning button on the receiver about 8 seconds until the indicator turns off,it means the codes are cleared successfully.