3000M AC 220V 12CH Saluran 12Ch Pengendali Radio RF Remote Control Nirkabel Overhead Bepergian Sistem Penerima + Pemancar

Category : Elektronik konsumen | Aksesoris & Bagian

USD 23.83USD 31.78

3000M AC 220V 12CH Saluran 12Ch Pengendali Radio RF Remote Control Nirkabel Overhead Bepergian Sistem Penerima + Pemancar

Description
Specification

Description

Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.

1.Transmitter

Channel:12CH

Remote Control Distance:0-3000m ( Ideal Distance WITHOUT Any Block and Signal Interfere,Could Rise or Fall 10%-90% in Real Situation )

Encode: fixed code 2264

Frequency:315MHZ/433MHZ

Size: 70*158*38m

Power Supply: DC6V (4 section 5 battery Note that the batteries do not match)

2.Receiver

1)1-12 Toggle/Self-Lock: Press->On; Press again->Off (Press key 1 to learn)

Press one button for one time is working/ON .press the same button again is stop/OFF. (press 1 ,1 relay works,press 1 again,1 relay stops working,2-12 works like this)

2)1-12 Latched/Inter-Lock: Press->On; Press other button->Off (Press key 3 to learn)

Press one button is working/ON ,press another button is stop/OFF.(press 1,1 relay works,press 2,1 relay stops working,2 relay works,3-12 works like this)

3)1-12 Momentary/Jog: Press and hold->On; Release->Off (Press key 2 to learn)

Keep pressing one button is working /ON. loosen your finger is stop/OFF.(press 1 and hold,1 relay works,release key 1,1 relay stops working,2-12 works like this)

4)1-6 Toggle 7-12 Momentary (Press key 4 to learn)

5) 1 Toggle 2-12 Momentary (Press key 5 to learn)

(Original Setting is Toggle , Change it by yourself.)

Decode: Learning code,soldering code

Power Supply (Operating Voltage): AC85-265V

Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC

Current:le10mA

Sensitivity:ge-110dBm

Operating Temperature:-40lsquoC ~ 80rsquoC

Size:164mmⅹ89mmⅹ18mm

Frequency:315 / 433 MHz

3.Learn code and Remove Code

Learn: input the 220V for the receiver,press the learning button then the LED indicator ON and loosen your finger.Then press the 1/2/3/4/5 key (choose the function) on the transmitter ,the indicator flashs 1 time,it means learning successfully.

Remove:keep pressing the learning button on the receiver about 8 seconds until the indicator turns off,it means the codes are cleared successfully.The receiver can store about 12pcs transmitters.

Note: 433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency

pacote inclued:

1x Transmitter

1x Receiver(with cover)

1 x Receiver(with cover)

1x Transmitter

1x Receiver(with cover)

2x Transmitter